Features:
• ALI/ETL Certified
• Removable/Replaceable Plunger
• Flow Control Orifice Prevents Rapid Decent
• Low Oil Lock, Alerts Operator To A Low Oil Condition
• Envirokote Corrosion Protective Coating - 20 Year Warranty
• Multi-Position Safety Locks With Single Point Release
• Special Raised Seal Gland Protects The Piston And Seal From Damage Caused By Accumulation Of Foreign Materials And Water.
• Large Diameter Bearing For Greater Stability
• Low Drive-Over Clearance (Less Than 4”)
• Four Position Adapter Pads And Auxiliary Adapters Permit Varying Heights For Accessibility

A-1AA1 Semi-Hydraulic (9,000 lb. capacity)
A-1AA3 Full-Hydraulic (9,000 lb. capacity)

Features:
• Automatic Safety Locks
• Removable/Replaceable Plunger
• Flow Control Orifice Prevents Rapid Decent
• Low Oil Lock, Alerts Operator To A Low Oil Condition
• Large Diameter Bearing For Greater Stability
• Floor Flush Automatic Inner Doors Keep Trench Covered At All Times
• Envirokote Corrosion Protective Coating - 20 Year Warranty
• 77-1/2” Drive-Thru Design Eliminates Low Vehicle Clearance Problems And Allows Ample Tire Clearance For Safe, Sure Spotting
• Quick Spotting Of Adapter Pads Achieved By Easy Outside-In Positioning Of Swing Rail
• Deep Full Width Bolster Provides Complete Under-Car Accessibility Plus Built-In Workbench Across Entire Width
• Four Position Adapter Pads And Auxiliary Adapters Permit Varying Heights For Accessibility

A-1AB1 Semi-Hydraulic (8,000 lb. capacity)
A-1AB3 Full-Hydraulic (8,000 lb. capacity)

Features:
• Solid Steel Arms And Bolsters
• Four Position Adapter Pads And Auxilary Height Extension Permit Varying Heights For Accessibility
• Envirokote Corrosion Protective Coating - 20 Year Warranty
• Oil Flow Control Orifice Protects Against Rapid Decent
• Removable/Replaceable Plungers
• Multi-Position Automatic Safety Locks With Single Point Release
• Large Diameter Bearing For Greater Stability
• Quick Spotting Of Adapter Pads Achieved By Easy Outside-In Positioning Of Swing Arms
• 81-1/4” Distance Between Pistions For Maximum Under-Car Accessibility; 77-1/2” Drive-Thru Width Allows Ample Tire Clearance For Safe, Sure Spotting
• Low Oil Lock, Alerts Operator To A Low Oil Condition

A-12D3 Full-Hydraulic (8,000 lb. capacity)

Features:
• ALI/ETL Certified
• Solid Steel Arms And Bolsters
• Large Diameter Bearing For Greater Stability
• Multi-Position Automatic Safety Locks With Single Point Release
• Four Position Adapter Pads And Auxilary Height Extension Permit Varying Heights For Accessibility
• Envirokote Corrosion Protective Coating - 20 Year Warranty
• Oil Flow Control Orifice Protects Against Rapid Decent
• Removable/Replaceable Plungers
• 77-1/2” Drive-Thru Width Allows Ample Tire Clearance For Safe, Sure Spotting
• Reversible Drive Thru/Over Superstructure And Alignment Superstructure Ready For Greater Versatility

A-12E3 Full-Hydraulic (8,000 lb. capacity)

Features:
• Solid Steel Arms And Bolsters
• Large Diameter Bearing For Greater Stability
• Multi-Position Automatic Safety Locks With Single Point Release
• Four Position Adapter Pads
• Envirokote Corrosion Protective Coating - 20 Year Warranty
• Oil Flow Control Orifice Protects Against Rapid Decent
• Removable/Replaceable Plungers
• 77-1/2” Drive-Thru Width Allows Ample Tire Clearance For Safe, Sure Spotting
• Reversible Drive Thru/Over Superstructure And Alignment Superstructure Ready For Greater Versatility

A-22E3 Full-Hydraulic (10,000 lb. capacity)

Features:
• Solid Steel Arms And Bolsters
• Large Diameter Bearing For Greater Stability
• Multi-Position Automatic Safety Locks With Single Point Release
• Four Position Adapter Pads
• Envirokote Corrosion Protective Coating - 20 Year Warranty
• Oil Flow Control Orifice Protects Against Rapid Decent
• Removable/Replaceable Plungers
• 77-1/2” Drive-Thru Width Allows Ample Tire Clearance For Safe, Sure Spotting
• Reversible Drive Thru/Over Superstructure And Alignment Superstructure Ready For Greater Versatility

A-22E5 Full-Hydraulic (12,000 lb. capacity)

Features:
• Removable/Replaceable Plungers
• Large Diameter Bearing For Greater Stability
• Multi-Position Safety Locks With Single Point Release
• Envirokote Corrosion Protective Coating - 20 Year Warranty
• Special Raised Seal Gland Protects The Piston And Seal From Damage Caused By Accumulation Of Foreign Materials And Water.
• Flow Control Orifice Prevents Rapid Decent
• Low Oil Lock, Alerts Operator To A Low Oil Condition
• Note: Superstructure Not Furnished By Manitowoc Lifts

A-1AN1 Semi-Hydraulic (8,000 lb. capacity)
A-1AN3 Full-Hydraulic (8,000 lb. capacity)

Features:
• Removable/Replaceable Plungers
• Large Diameter Bearing For Greater Stability
• Multi-Position Safety Locks With Single Point Release
• Envirokote Corrosion Protective Coating - 20 Year Warranty
• Flow Control Orifice Prevents Rapid Decent
• Low Oil Lock, Alerts Operator To A Low Oil Condition
• Note: Superstructure Not Furnished By Manitowoc Lifts

A-12N3 Full Hydraulic - 57-1/2"centers (8,000 lb. capacity)
A-12L3 Full Hydraulic - 89-3/4" centers (8,000 lb. capacity)

Features:
• Optional Envirokote Corrosion Protective Coating - 20 Year Warranty
• Standard Track Length Is 10 Feet - Other Lengths Available Up To 18 Feet
• Automatic Safety Locks Standard
• Manually Ratcheted Front Is Standard - Optional Hydraulically Driven Front Carriage For Convenience
• Front Piston-Casing Assembly Is Movable To Accommodate Varying Wheelbases
• Floor Level Controls Allow For Operator To Check For Proper Adapter-To-Vehicle Contact
• Rear Wheel Wells Insure Proper Rear Alignment
• Removable/Replaceable Plungers

Several lifts: 12,000 lb. to 36,000 lb. capacities.

Two Post Fore & Aft Lift 

Features:
• Optional Envirokote Corrosion Protective Coating - 20 Year Warranty
• Standard Track Length Is 12 Feet - Other Lengths Available Up To 22 Feet
• Air-Operated, Multi-Position Remote Release Lift Locks, Adding Safety And Convenience, Are Standard
• Manually Ratcheted Front Is Standard - Optional Hydraulically Driven Front Carriage For Convenience
• Front Piston-Casing Assembly Is Movable To Accommodate Varying Wheelbases
• Floor Level Controls Allow For Operator To Check For Proper Adapter-To-Vehicle Contact
• Removable/Replaceable Plungers

A-3BM5 Full Hydraulic - 36,000 lb. capacity.
A-4BM6 Full Hydraulic - 50,000 lb. capacity.

Features:
• Optional Envirokote Corrosion Protective Coating - 20 Year Warranty
• Space-Saving Design, Over 4 1/2 Feet Narrower Than A Conventional 4 Post Surface-Mounted Lift
• 192" Wheelbase Easily Accomodates Extended-Body Crew Cab Trucks
• Ideal For Quick-Lubes, Fast Inspection, Transmission, Exhaust, And 4 X 4 Services
• Multi-Position Safety Locks With Positive Rack & Pinion Equalization
• 22" Wide Runways Accomodates "DUALIES"
• Removable/Replaceable Plungers
• Fast, Safe, Wheel-Engaging Lifting

E04 POWER UNIT INCLUDED

POWER UNIT CAN HANDLE UP TO 2 LIFTS!!

A-22R5A Full Hydraulic - 10,000 lb. capacity.

Features:
• Optional Envirokote Corrosion Protective Coating - 20 Year Warranty
• Standard Track Length Is 12 Feet - Other Lengths Available Up To 22 Feet
• Air-Operated, Multi-Position Remote Release Lift Locks, Adding Safety And Convenience, Are Standard
• Manually Ratcheted Front Is Standard - Optional Hydraulically Driven Front Carriage For Convenience
• Front Piston-Casing Assembly Is Movable To Accommodate Varying Wheelbases
• Floor Level Controls Allow For Operator To Check For Proper Adapter-To-Vehicle Contact
• Removable/Replaceable Plungers

A-3FM5 Full Hydraulic - 54,000 lb. capacity.
A-7FM6 Full Hydraulic - 75,000 lb. capacity.

Features:
• Low Decible Motor
• High Output Pump
• Tamper Proof By-Pass Valve
• Several Auxiliary Reservoirs Can Be Run Off One Power Unit
• No Electrical Components Furnished By Manitowoc Lifts (Magnetic Starter, Push Button Stop-Start)
• For Use With Electric-Oil Fore & Aft Lifts Only (Or Converting Existing Air-Oil Lifts To Electric-Oil Lifts)

E04 - 7-1/2 HP Motor - 100 Gal. Cap.
E05 - 10 HP Motor - 100 Gal. Cap. (For Use With 4BM & 7FM Only)
E02 - Auxiliary Reservoir